The 2021 DeKalb (Sandwich) and Starved Rock hamfests were great successes! This was the first time for Starved Rock Radio Club to hold the hamfest in Mendota IL which worked out great - hope it helps the club rebuild what was once one of the best hamfests in the area..
The South Milwaukee 'fest is special because it's what a hamfest should be, to my way of thinking at least - a big tailgate swap area and nothing else. No "indoor sellers" (at least not many), no new equipment dealers, and no seminars or other distractions from the business at hand - buying and selling old radio junk. It's always been the kind of 'fest where a load of "barn fresh" gear is likely to show up for picking, and where friends from half a state or more away will make the journey. Really glad to see it's back! (even without the free beer)
Photo above is from Peoria 2007, in front of the "Taj", with the famous WA9VRH rib smoker visible in the foreground.
As the hamfest season for 2021 draws to a close it's now possible to say that the two I first wrote about were the best. The Peoria Superfest did take place, which is a bit surprising since the club was forced to relocate TWICE. This is probably the new permanent location as the city of East Peoria which owns the event center added crushed blacktop to the dirt field, making it at least as good as the worn-out parking area at Expo Gardens. The indoor space seemed adequate and hopefully if the outdoor flea market expands to fill the available space the club and city will find a way to add more spaces. The biggest shortcoming was the lack of any kind of food service at the hamfest. Why the club didn't at least notify a food truck vendor or two is a mystery to all. On the plus side, the outdoor spaces were generous in size and marked (although not clearly) and there are some good local restaurants within walking distance.
The CFMC has held it's RadioFest at the Boone County Fairgrounds at Belvidere IL since the closing of "Grayslake" and it's a nearly ideal venue with long paved "streets" between the vendor spaces and plenty of indoor space, bathrooms, food, etc. The problem was attendance - based on the number of sellers in previous years the fleamarket area had to be at least 20% smaller, and the overall quality of "shtuff" included more non-ham offerings than usual. But it was a beautiful day and hopefully attendance will bounce back at both 'fests next year.
The annual BBQ-AM Get-together at the beautiful home of KI8BQ was again, as WA6GYC puts it, "the high point of the summer". This will be the last year that Gary is able to host the event, but stay tuned, as plans are being made for it to continue under the auspices of Terry N6TLU at Battle Creek MI in 2022.
Crystal Replacement
Posted: 08/226/2024
Comments: 0 |
Making SMT "no lead" parts easier to use
SMT is the future - but how can we actually use parts without leads? ... READ MORE |
Crystal Replacement
Posted: 02/38/2024
Comments: 0 |
How good can a crummy receiver be?
Hundreds of different simple SDR receivers have been designed around Dan Tayloe's Quadrature Sampling Detector or QSD. Mine add nothing to the state of the art, and in fact subtract things, as I like minimalist solutions and the QSD is right in that sweet spot. Following the evolution of Tayloe's design I delete the resistors in series with the sample lines for inst... READ MORE |
Technical
Posted: 02/37/2024
Comments: 0 |
What's in a number (3253)?
The FST3253 dual four-to-one mux/demux IC has long been used as a "Tayloe Detector" or QSD (and QSE) in low-cost SDRs. They provide incredible performance for such a simple circuit, converting RF to baseband IQ with low loss and the ultimate in simplicity. Unfortunately the original FST3253 part has become obsolete and while substitutes are available, this is where the... READ MORE |
Vintage Ham Radio
Posted: 02/32/2024
Comments: 0 |
The Stancor 10P Transmitter
There weren't really many commercial transmitters in the 1930s as most hams built their own. But many of the ones that were offered came from the transformer companies who had two chances to profit. First, from those who would buy the kit, and two, from those would would see it in the (free) booklets the companies provided to their distributors who would then sell the iron to ham... READ MORE |
Vintage Ham Radio
Posted: 12/355/2023
Comments: 0 |
The Care and Feeding of the EF Johnson Courier amplifier
The EF Johnson "Courier" is a grid-driven amplifier using two 811A tubes. Switching is provided for operating in either class C for CW or as a class B linear amplifier for AM or SSB. Rated power is 500 watts input for CW, 500 watts PEP input for SSB, and 200 watts input for double-sideband AM with carrier. Since all amateur power levels were meas... READ MORE |
Historic
Posted: 11/329/2023
Comments: 0 |
TV Duplexer
Some things are interesting, even if totally useless nowadays. Such is the case with the Philco 426-3034 Crossover Kit for UHF TV. What the heck is that? Well, back in the late 50s, UHF television stations operating on channels 14-83 started to appear in many areas of the US where viewers had a VHF-only TV antenna, and in many cases an externa UHF converter was... READ MORE |
Crystal Replacement
Posted: 11/327/2023
Comments: 0 |
Replacing failed crystals
For decades, quartz crystals were used everywhere a stable frequency source was needed, even in some applications that depended on overtone (harmonic) behavior into the VHF range. These crystals were less stable and more dependent on circuit parameters that fundamental types and thus more problematic. Such was the case with the 94 MHz crystal in the 2 meter converter ... READ MORE |
Historic
Posted: 11/315/2023
Comments: 0 |
My Own Ham Radio Story by W9RAN
Everyone has a story of how they got involved in ham radio - this is mine. It started much earlier, including receiving a Knight Kit Span Master shortwave radio for Christmas in about 1963, at age 12. I'll never forget the night my dad and I finished building it and I wanted to try it out. It came with a 50 ft. antenna which was still coiled up - but ... READ MORE |
Technical
Posted: 09/267/2023
Comments: 0 |
Hot to simulate vacuum tubes in LTSpice
LTSice is a powerful simulation tool that is provided free by Linear Technology Corp. It comes with a complete library of passive and common analog solid-state components but if you want to use it to simulate vacuum tubes, it doesen't work as-is. Even though triode and pentode symbols can be found in the "Misc" folder, they are just schematic symbols and... READ MORE |
Friends Remembered
Posted: 07/208/2023
Comments: 0 |
Merv Schweigert, K9FD (SK)
Comments from Robert Nickels W9RAN, July 27, 2023: There is nothing worse for a ham radio operator than to see a beloved friends callsign with the letters "SK" behind them. Yet sadly, that's what happened on July 23, 2023, when I learned of the passsing of Merv Schweigert, K9FD. While many of our ham radio interests were different - Me... READ MORE |
Products
Posted: 12/10/2018
Comments: 0 |
How To Get Tech Help From Strangers On The Internet
Paul Stoffregen is the creator of the Teensy microcomputer and related products and has authored a vast amount of exceptionally good and useful public domain software to go with it. As the old saying goes "no good deed goes unpunished" and in the course of answering customer and would-be customer questions, Paul has written over 18,000 replies. From that he's ... READ MORE |
Products
Posted: 11/11/2018
Comments: 0 |
VERSA-TR purchasing
The VERSA-TR kit designed by RAN Technology Inc. is available from our friends at Hayseed Hamfest. Please direct all order-related questions to them at https://hayseedhamfest.com/pages/contact-us ... READ MORE |